Tascam DR-100MK3, Professzionális, 2 csatornás, hordozható rögzítő, 24/192

Recording media

SD card (64 MB−2 GB)

SDHC card (4−32 GB)

SDXC card (48–128 GB)

Recording/playback formats

WAV (BWF): 44.1/48/88.2/96/176.4/192 kHz, 16/24 bits

MP3: 44.1/48kHz, 128/192/256/320 Kbit/s

Number of audio channels

2 channels (stereo)

MIC/LINE IN jacks (XLR support phantom power)

XLR-3-31 (1: GND, 2: HOT, 3: COLD)

6.3-mm standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)

When MIC input source selected

  Maximum input level

+2 dBu (PAD on)

  Minimum input level

–70.5 dBu (PAD off)

  Input impedance

XLR: ≥2 kΩ

TRS: ≥20 kΩ

When LINE input source selected

  Maximum input level

+24 dBu

  Nominal input level

+4 dBu

  Input impedance

≥20 kΩ

EXT IN jack (can provide plug-in power)

3.5-mm stereo mini jack

When EXT MIC input source selected

  Maximum input level

–2.8 dBu (PAD on)

  Minimum input level

–62.8 dBu (PAD off)

  Input impedance

≥50 kΩ

When EXT LINE input source selected

  Maximum input level

+6 dBV

  Nominal input level

−10 dBV

  Input impedance

≥2 kΩ

LINE OUT jack

3.5-mm stereo mini jack

  Output impedance

200 Ω

When LINE input source selected

  Nominal output level

–14 dBV

  Maximum output level

+6 dBV

In other situations

  Nominal output level

–10 dBV

  Maximum output level

+6 dBV

Headphones jack

3.5-mm stereo mini jack

  Maximum output power

40 mW + 40 mW (headphones connected, 32 Ω load)

Built-in speaker

0.4 W (mono)

DIGITAL IN connector

3.5-mm TRS jack (using dedicated conversion cable)

  Format

IEC60958-3 (SPDIF)

USB port

Micro-B connector

  Format

USB 2.0 HIGH SPEED mass storage class

REMOTE jack

2.5-mm TRS jack

Frequency response

MIC/LINE IN (MIC, PAD On) to LINE OUT

MIC/LINE IN (LINE) to LINE OUT

EXT IN (MIC, PAD On) to LINE OUT

EXT IN (LINE) to LINE OUT

  44.1/48 kHz sampling frequency (JEITA)

20 Hz − 20 kHz +0.5 dB/−1 dB

  88.2/96 kHz sampling frequency (JEITA)

20 Hz − 40 kHz +0.5 dB/−2 dB

  176.4/192 kHz sampling frequency (JEITA)

20 Hz − 80 kHz +0.5 dB/−4 dB

Distortion

MIC/LINE IN (MIC, PAD On) to LINE OUT

MIC/LINE IN (LINE, +20dBu In) to LINE OUT

EXT IN (MIC, PAD On) to LINE OUT

EXT IN (LINE) to LINE OUT

  44.1/48/88.2/96/176.4/192 kHz sampling frequency (JEITA)

≤0.007 %

S/N ratio

MIC/LINE IN (MIC, PAD On) to LINE OUT

MIC/LINE IN (LINE) to LINE OUT

EXT IN (MIC, PAD On) to LINE OUT

EXT IN (LINE) to LINE OUT

  44.1/48/88.2/96/176.4/192 kHz sampling frequency (JEITA)

≥102 dB

Equivalent input noise (EIN)

≤–124 dBu

Note: based on JEITA CP-2150

Power supply

Built-in lithium-ion rechargeable battery

2 AA batteries (alkaline, NiMH or lithium-ion)

USB bus power from a computer

AC adapter (Tascam PS-P520E, sold separately)

Battery pack (Tascam BP-6AA, sold separately)

Power consumption

7.5 W (maximum)

Use conditions

UNI MIC (built-in directional mic) input

Phantom power unused

STEREO WAV (BWF)/44.1 kHz, 16-bit recording

  Using built-in (lithium-ion rechargeable) battery

12:00

  Using lithium batteries (Energizer Ultimate Lithium)

7:00

  Using NiMH battery (eneloop)

3:30

  Using alkaline batteries (Evolta)

2:45

Use conditions

MIC/LINE IN jack/mic input

Phantom power used (+48V, 2 × 3 mA)

STEREO WAV (BWF)/44.1 kHz 16-bit recording

  Using built-in (lithium-ion rechargeable) battery

6:00

  Using lithium-ion batteries (Energizer Ultimate Lithium)

3:30

  Using NiMH battery (eneloop)

2:15

  Using alkaline batteries (Evolta)

1:00

Charging time

By USB: about 10 hours

Using PS-P520E: about 4½ hours

Dimensions (w × h × d)

80 mm × 156 mm × 35 mm (excluding protrusions)

Weight

425 g (including batteries)

375 g (excluding batteries)

Operating temperature range

0–40 °C